Able Reducer series (co-axial shaft)
Tapered roller bearings are adopted and high load capacity is achieved.
- ・Reduction ratio ： 1/3～1/100
- ・Backlash ： 0.05°(below 3min.)
- ・Backlash is below 5min. Perfect solution for precision positional control
- ・No grease leak by the use of hi-viscosity anti-separation grease
- ・High efficiency with no need for the oil seal at the input section
- ・Applicable with all servomotors by the use of adapters
- ・No need to replace the grease for the life of the product. Installable at any angle without leakage concern.