Performance table Right angle NEV series(Input speed: 3,000rpm)

Reduction ratio	Model number	Output speed	Rated output torque	Max.instantaneous output torque	Allowable radial load	Allowable thrust load	Moment of inertia reflected to input shaft	Allowable output torque	Max. instantaneous allowable output torque
		(rpm)	(N-m)	(N-m)	(N)	(N)	(10-4×kgm2)	(N-m)	(N-m)
1/3	NEVS□-3B-100	1000	0.48	1.43	784	392	0.377	5.00	15.0
	NEVS□-3B-200		1.34	4.01	784	392	0.510	5.00	15.0
	NEVS□-3B-400		3.25	9.74	784	392	0.504	5.00	15.0
	NEVS□-3C-750		6.44	19.3	784	392	0.978	8.83	26.5
	NEVS□-3C-1000		8.59	25.8	784	392	1.77	9.02	27.1
	NEVS□-3D-1500		11.9	35.8	980	490	3.90	22.6	67.7
	NEVS□-3D-2000		16.7	50.1	980	490	3.90	22.6	67.7
	NEVS□-3D-2500		21.5	64.4	980	490	3.90	22.6	67.7
	NEVS□-3E-3000		24.8	74.5	1176	588	6.61	36.1	108
	NEVS□-3E-3500		29.6	88.8	1176	588	6.61	36.1	108
	NEVS□-3E-4000		34.4	103	1176	588	6.61	36.1	108
1/5	NEVS□-5B-100	600	0.99	2.96	980	490	0.144	1.34	4.03
	NEVS□-5B-200		2.58	7.73	980	490	0.539	4.57	13.7
	NEVS□-5C-400		5.15	15.4	980	490	0.555	5.40	16.2
	NEVS□-5D-750		9.66	28.9	1176	588	1.68	10.1	30.4
	NEVS□-5E-1000		9.86	29.6	1470	735	2.97	27.1	81.2
	NEVS□-5E-1500		17.8	53.5	1470	735	2.97	27.1	81.2
	NEVS□-5E-2000		25.8	77.3	1470	735	2.97	27.1	81.2
1/9	NEVS□-9B-100	333	2.32	6.96	1176	588	0.0978	2.41	7.25
	NEVS□-9C-200		4.64	13.9	1176	588	0.493	8.83	26.5
	NEVS□-9D-400		7.37	22.1	1176	588	0.629	9.73	29.2
	NEVS□-9D-750		17.4	52.1	1176	588	1.42	18.2	54.7
	NEVS□-9E-1000		17.8	53.3	1470	735	2.35	48.7	146
	NEVS□-9E-1500		32.1	96.2	1470	735	2.35	48.7	146
	NEVS□-9E-2000		46.4	139	1470	735	2.35	48.7	146
1/15	NEVS□-15B-100	200	3.87	11.6	1470	735	0.0535	4.07	12.2
	NEVS□-15C-200		7.73	23.1	1470	735	0.323	8.83	26.5
	NEVS□-15D-400		15.4	46.3	1470	735	0.365	16.2	48.6
	NEVS□-15E-750		28.9	86.9	1764	882	0.962	29.2	87.6
	NEVS□-15E-1000		38.7	116	1764	882	1.75	40.6	122
1/27	NEVS□-27B-100	111	6.96	20.9	1470	735	0.0357	7.31	21.9
	NEVS□-27D-200		10.7	32.0	1470	735	0.228	29.1	79.1
	NEVS□-27D-400		27.8	75.3	1470	735	0.228	29.1	79.1
	NEVS□-27E-750		52.2	157	1764	882	0.599	54.6	164
1/45	NEVS□-45C-100	66	11.6	34.8	1764	885	0.608	12.1	36.5
	NEVS□-45D-200		23.2	69.6	1764	885	0.749	29.1	79.1
	NEVS□-45E-400		46.4	139	2070	1035	1.38	56.8	170
1/75	NEVS□-75D-100	40	19.3	58.0	2070	1035	0.507	29.1	79.1
	NEVS□-75E-200		38.7	116	2370	1185	0.809	56.8	170
1/105	NEVS□-105D-100	28	27.1	75.3	2370	1185	0.462	29.1	79.1
	NEVS□-105E-200		54.1	162	2670	1335	0.694	56.8	170

1) Moment of inertia is only for the reducer. It does not include the servo motor's moment of inertia.
2) Max. allowable input speed is 5000rpm. Please use the unit at 3000rpm and below for continuous using.
3) The allowable radial load is based on the load being applied at the center of the output shaft.
4) Helical gears are used for all models of NEV series.

PRODUCTS | CUSTOMER SUPPORT | COMPANY INFORMATION | TOP