 |
 |
- User friendliness.
- Front protection rubber for shock.
- IP63
Specifications
| Model | DT-311P | DT-315P | |
|---|---|---|---|
| Internal Mode |
Flashing range | 60.0-3,000 rpm | |
| Accuracy | ±0.01% of reading | ||
| Resolution | 0.1 rpm:60.0～200.0 rpm 0.2 rpm:200.1～3000.0rpm |
||
| Phase Shift | Use ＋/－ push buttons(360-in 6 seconds) | ||
| Display Update Time | 0.2 sec approx. | ||
| Output Signal | Synchronous,400 msec. Pulse output, 0 to＋12 VDC amplitude (approx.),4.7kΩ inpedance | ||
| Rate Multiplier/Divider | Multiply by 2, divided by 2(while button is pressed) | ||
| External Mode |
Flashing range | 60-3,000 rpm | |
| Accuracy | ±0.01% ±1 digit | ||
| Phase Shift | 0-359° 200-3,000 rpm | ||
| Delay Time | 0-300 ms at 200-3,000 rpm | ||
| External Trigger Input Signal |
LO level:0-0.8 VDC, HI level:2.5-12 VDC, pulse width 50μ sec min. | ||
| Input Impedance | 4.7kΩ at 12V/6.8kΩ at 0V | ||
| General | Display | 5 digits, 10 mm high,LED | |
| Flash tube Power/Life | Xenon,10W max.(100 million flashes) | ||
| Flash Duration | 10-40 μsec | ||
| Sensor Power Supply | 12VDC(40mA) | ||
| Low Battery Indicator | Display shows all L's | ||
| Protective Construction | IP 63 | ||
| Power Requirement | 100VAC,230VAC,30VA | Internal Battery Pack Battery charger (100VAC,230VAC) |
|
| Operating Temperature Range | 0-40℃ | ||
| Weight | 1.4kg | 1.9kg | |
| Dimensions | 217×130×154mm | 259×130×158mm | |
| Standard Accessories | Metal connector for input/output |
AC adapter/charger | |
Dimensions(DT-311P)
Dimensions(DT-315P)
